2012年04月07日

KD1JV Tri-Bander CW transceiver

http://www.qrpkits.com/
  • April 6, 2012 Steve Weber has done it again. Hendricks QRP Kits is proud to announce Steve's latest kit the Weber Tribander. This is a great radio and it has a great price!! $200.00 for 3 bands of your choice, from 15, 17, 20, 30, 40, or 80 meters, and it comes with a punched and drilled case with a bail, digital readout, DDS VFO, RIT, Audio Derived AGC, built in keyer with memories, Rotary Encoder Tuning, 4 IF crystal filtering, 600Hz audio filter, small size 6"W x 4"D x 1.5"H, weighs 12 ounces, and draws 90mA on receive and 600/800mA on transmit at 5 Watts. All bands are 5W output. We are offering a special pre order deal of only $.01 shipping for US orders and $10 shipping to DX addresses until May 1, 2012. All preorders will ship the first week of May.


http://www.qrpkits.com/tribander.html

  • Any three ham bands, 80, 40, 30, 20, 17 or 15 meters, choose at time of order.
  • 5 watts output on all bands with 13.8V supply
  • Built in Iambic keyer with 5 to 40 wpm code speed, selectable Iambic A or B modes and two 63 character message memories.
  • Receiver sensitivity, 0.2 uV MSD
  • DDS VFO for rock steady stability with 50 Hz and 200 Hz tuning rates
  • Easy to read four digit LED display with leading zero suppression.
  • Rotary knob tuning
  • RIT (receive incremental tuning)
  • Four IF crystals for excellent selectivity and opposite side band rejection
  • 600 Hz audio filter
  • Audio derived AGC
  • Small size, 6” wide, 1.5” tall and 4” deep.
  • Light weight, 12 ounces.
  • Modest supply current requirements, 90 ma on receive (no signal) and 600 to 800 ma on transmit at 5W out (current depends on band, higher bands draw more current)
posted by HJ at 04:01| Comment(0) | TrackBack(0) | Kit
この記事へのコメント
コメントを書く
お名前: [必須入力]

メールアドレス:

ホームページアドレス:

コメント: [必須入力]

認証コード: [必須入力]


※画像の中の文字を半角で入力してください。
この記事へのトラックバックURL
http://blog.sakura.ne.jp/tb/54841966
※言及リンクのないトラックバックは受信されません。

この記事へのトラックバック